Hope Mono Mini brakes: A new lightweight lever giving smooth, progressive feel and more power. Split clamp for easy fitting. Integrated master cylinder reservoir for easy bleeding. Adjustable lever reach. A new one piece caliper, machined from solid billet of aluminium with stiffer caliper bridge and 3D machined pockets. As well as reducing weight, this also allows us to make a more rigid caliper, improving the lever feel. Caliper pistons are made from phenolic to isolate the caliper from the heat generated in the pads.

Hope Mono M4: The only one-piece, four piston caliper available in the bike world offers you additional power with super rigid caliper and solid lever feel. It uses the Mini lever with a fixed caliper housing four opposing pistons. Caliper pistons are now made from phenolic to isolate the caliper from the heat generated in the pads. An open system allows for automatic pad wear adjustment and enables the brake to handle the highest temperatures without "pump-up".

Hope Moto V2 Brake The new Moto V2 brake sits in the line up between the Mono M4 and Moto 6. Although is some 25% more powerful than either brake. Two 25mm pistons give huge amounts of stopping power, and the one piece caliper and delta shaped master cylinder keep things flex free even under the hardest braking. The newly designed lever offers BPC (Bite Point Control)An adjustment that works with the lever reach to give perfect set up and feel for different riders preferences.

Hope Mono Mini Pro brakes: The lightweight racers dream! The ever popular Mono Mini just went on a diet! We have stripped the MM2 down and given it a new look for those looking for a high Performance and low weight brakeset.
Using the new Mini lever design and existing caliper for 2007 - the brake has shed even more weight from it’s previously slimline design through the use of a carbon lever, 12 bolt Ti kit and lightweight version of the floating rotor.

Hope Moto V2 Vented rotors: Taking braking performance to a new level. Using the same proven floating design as our other rotors and advanced manufacturing techniques, the internal fins allow the air to flow between the two friction parts. The induced air flow significantly reduces and delays the heat build up in the rotor. The rotor also gives a better and more consistent braking performance in wet condition thanks to its capability to clear the water layer through the fins. If you want to abuse your brake in endless descents this rotor is for you.

Since its introduction, the airsprung Fox 32 Float R 140 QR15 is synonymous with high performance. The new QR15 axle system is lighter than 20mm thru axles and provides increased stiffness for better handling and steering precision. Great for cross country/all mountain.

This kit includes Hope Pro 2 front and rear hubs, so do not select the Hope Hubs upgrade, it is included here.

Since its introduction, the airsprung Fox 32 Float QR15 is synonymous with high performance. Legendary Fox Steering precision is complimented by new adjustability features: low speed compression damping, lockout force adjust, rebound damping and a Lock-out on this upgrade. The new QR15 axle system is lighter than 20mm thru axles and provides increased stiffness for better handling and steering precision. Great for cross country/all mountain

This kit includes Hope Pro 2 front and rear hubs, so do not select the Hope Hubs upgrade, it is included here

The perfect all-rounder, from steep climbs to your favourite downhill, the Fox 32 TALAS RLC QR15has you covered. The proven TALAS (travel adjust linear air spring) concept with its quick three stage system, adjustable with a 90 degree sweep of a lever, setting travel between 140, 120 and 100 mm. Combined with the legendary steering precision and incredibly stiff chassis, and the ultra refined and patented RLC open bath system, the lightweight and feature packed TALAS is a sure bet for any trail condition. The new QR15 axle system is lighter than 20mm thru axles and provides increased stiffness for better handling and steering precision. Great for cross country/all mountain riding.

This kit includes Hope Pro 2 front and rear hubs, so do not select the Hope Hubs upgrade, it is included here

Hope Headset: Features rubber sealed cartridge type, stainless steel bearings (manufactured by Hope) and additional 'o' ring seals in the cups to ensure years of maintenance free running.

The Hope Pro pack includes:
Hope Headset,
Hope Wheel Quick release skewers,
Hope Seat-post clamp,
Hope floating disc rotors.

Hope Pro II Hubs: The all new Pro2 range of hubs include a further development of our proven ratchet mechanism. This features a one piece 7075 aluminium rotor body and pawl carrier. Four pawls engage into a twenty-four tooth steel ratchet which is fixed into the hub shell and is sealed with a frictionless, non contact labyrinth seal. The axle runs on four cartridge bearings. The hub shell is machined from a solid billet of 2014 T6 aluminium.

Rock Shox Maxle compatible Swingarm: A 12mm thru-axle system that is entirely toolfree, Maxle is faster than a standard quick release lever yet retains all of the stiffness benefits of a 20mm system. For 2007, all Maxles feature the 360¡ lever design. Put it where you want it!
This upgrade requires a Hope Pro 2 Rear bolt-thru hub.

The Orange performance pack includes:
Thomson X4 Stem,
Thomson X4 Seatpost,
Easton XC 70 Carbon Handlebar,
Fizik Gobi saddle.

Select Colour... Apple Green [+ £100.00] Brass Monkey [+ £100.00] Bright Silver [+ £100.00] Chrome Grey [+ £0.00] Cosmic Super Turf [+ £0.00] Cosmic White [+ £100.00] Disco Black [+ £100.00] Electric Blue [+ £0.00] Fools Gold [+ £0.00] Lime Green [+ £100.00] Mandarin Orange [+ £100.00] Metallic Black [+ £100.00] Orange [+ £100.00] Passion Red [+ £0.00] Pearl White [+ £0.00] Powder Blue [+ £100.00] Sassy Pink [+ £100.00] Sunset Yellow [+ £100.00]